|
|
MELT
PRESSURE TRANSDUCERS
mV / V output
M3
Main features
Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Strain gage Wheatstone bridge
Accuracy : <ą0.25% FSO (H); <ą0.5% FSO (M)
Internally generated 80% calibration signal (R-Cal)
Fluid-filled system for temperature stability
Fully interchangeable with all existing brands
Grade of protection: IP65 (6-pin connector version)
1/2-20UNF , M18x1.5 standard threads ;
other types available on request
Standard diaphragm is 15-5 PH stainless steel with Armoloy
coating
17-7 PH corrugated diaphragm with TiN coating
(Titanium Nitride) for ranges below 100bar-1500psi
Other diaphragms available on request
Pressure transducer
TP
PRESSURE TRANSDUCER
Main Features
Pressure range: 0-10 to 0-1000 bar / 0-150 to 0-15000 psi
Entirely in stainless steel
Internally generated calibration signal
Protection level: IP65
Available in intrinsic safety version EEx ia IIC T6
TKF
THICK FILM ON STEEL PRESSURE TRANSMITTER
Main features
Pressure ranges from 0-7 to 0-500 bar
Thick film on steel strain gauge sensor
Output signal 4...20mA (2-wires) / 0,1...5,1Vdc / 0,1...10,1Vdc
/
0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc
Protection degree: IP60 for connector output, IP65 for cable
output.
TKG
THICK FILM ON STEEL PRESSURE TRANSMITTER:
Main features
Pressure ranges from 0-2 to 0-500 bar
Thick film on steel strain gauge sensor
Output signal 4...20mA (2-wires) / 0,1...5,1Vdc /
0,1...10,1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc
Protection degree: IP60 for connector output,
IP65 for cable output.
TPFA
PRESSURE TRANSMITTER WITH FLUSH
MEASUREMENT
DIAPHRAGM
The selection of highly stable electronic components and the
availability of output signals in voltage and current make series
TPFA trans-mitters
suitable for applications in which the signal has to be
transmitted over long distances or in smart control and checking
systems.
Main features
Pressure range: 0 ... 10; 0 .. 1000 bar / 0 ... 150; 0 ... 15000
psi
Precision class: 0.3% beyond 50 bar; 0.6% up to 50 bar
Entirely in stainless steel
Internally generated calibration signal
Output signal:0.1 ... 5.1Vdc / 0.1 ... 10.1Vdc; 4 ... 20mA two
wires;
1 ... 5Vdc / 1 ... 10Vdc / 1 ... 6Vdc / 0 ... 5Vdc / 0 ... 10Vdc
Protection level: IP65
|
|
